C6 Ls2 Corvette putting down good numbers after installing our Headers & X-pipe Combo

Thank you for your business Christion Gonzales.

Chevrolet Corvette C6 Base model LS2 V8 05-07 Race Spec Performance Headers + X-Pipe

Made of Polished Stainless Steel with TIG Welding Stainless Steel
47mm (1 7/8") Piping with 76mm (3") Collectors + 76mm X-Pipe all Mandrel Bent Piping

Actual picture shown

Very Aggressive Deep Tone Sound with Great performance Gain for your Corvette C6

Will not work on stock exhaust set-up without some modification. You will need to use these with an aftermarket performance exhaust system.
Bolts & Gaskets Not Included / Need to Re-use Stock Bolts & Gaskets.
Requires Extended O2 Sensor Wires

Special Note for Installation:
"When installing these Headers or X-Pipe you must leave them loose at the Heads while you attach the X-Pipe. After the Header collectors and X-Pipe are connected you can torque down the flanges at the Heads, if you don't follow this instructions the X-Pipe will not bolt up to Header bottom collectors.

As with any aftermarket header some adjustments may be required."